How To Use Thermal Grease To Improve Heat Dissipation?

Thermal Grease is a material used to improve heat dissipation in electronic devices. It improves heat conduction efficiency by filling the tiny gaps between the heat sink and the heat source.

1. Choose the right Thermal Grease

Choose the right Thermal Grease according to your needs. The thermal conductivity of silicone grease is usually measured by its thermal conductivity (W/mK). Choosing products with higher thermal conductivity can provide better heat dissipation.

2. Preparation

Before applying Thermal Grease, make sure that both the heat sink and the heat source surface are thoroughly clean.

3. Apply Thermal Grease

Application method: Thermal Grease should be applied evenly on the surface of the heat source (such as CPU or GPU).

Note: Avoid using too much silicone grease, which may cause poor heat dissipation. Just apply a thin layer, making sure to cover the entire surface, but there should not be too much accumulation.

4. Install the heat sink

Installation steps: Install the heat sink immediately after applying the silicone grease. Gently press the heat sink together to ensure that the grease makes good contact between the heat source and the heat sink.

Attach the heat sink: Follow the heat sink installation instructions to ensure that it is firmly fixed to the heat source.

5. Inspection and maintenance

Inspect the heat dissipation effect: After installation, you can run some load tests to monitor the temperature of the device to confirm whether the heat dissipation effect has improved.

Regular maintenance: Thermal Grease may dry out or deteriorate over time. Regular inspection and replacement of thermal grease can maintain optimal heat dissipation.