Availability: | |
---|---|
Thermal Conductivity Pad Product Description:
Features:
This thermal conductivity pad exhibits excellent properties including good thermal conductivity, insulation, viscosity, elasticity, low heat resistance, and filling capability.
The thermally conductive silicone sheet possesses outstanding thermal conductivity, meeting the thermal insulation requirements of most electronic products.
Specifically designed for use in transferring heat through gaps, this pad effectively fills the gaps and facilitates the transfer of heat from heat-generating components to heat sinks.
Specifications:
Product Type: Thermal Conductive Pad
Size: 100 x 100 x 0.5mm (Customizable)
Color: Blue
Thermal Conductivity Coefficient: 3.0W/mK
Mass Resistivity: 10^12
Thickness Range [㎜]: 0.5 ~ 2.0mm
User Manual:
Surface Preparation: Clean the surface thoroughly by removing any dust and oil to ensure proper adhesion.
Protective Film Removal: With one hand, peel off the protective film from one side of the product. Avoid removing the protective film from both sides simultaneously to minimize direct contact with the silicone sheet, which could potentially damage its viscosity and thermal conductivity.
Heat Sink Installation: After removing the protective film from one side, firmly press the pad onto the heat sink surface. Apply pressure evenly and secure the pad in place using screws for fixation.
Thermal Conductivity Pad Product Description:
Features:
This thermal conductivity pad exhibits excellent properties including good thermal conductivity, insulation, viscosity, elasticity, low heat resistance, and filling capability.
The thermally conductive silicone sheet possesses outstanding thermal conductivity, meeting the thermal insulation requirements of most electronic products.
Specifically designed for use in transferring heat through gaps, this pad effectively fills the gaps and facilitates the transfer of heat from heat-generating components to heat sinks.
Specifications:
Product Type: Thermal Conductive Pad
Size: 100 x 100 x 0.5mm (Customizable)
Color: Blue
Thermal Conductivity Coefficient: 3.0W/mK
Mass Resistivity: 10^12
Thickness Range [㎜]: 0.5 ~ 2.0mm
User Manual:
Surface Preparation: Clean the surface thoroughly by removing any dust and oil to ensure proper adhesion.
Protective Film Removal: With one hand, peel off the protective film from one side of the product. Avoid removing the protective film from both sides simultaneously to minimize direct contact with the silicone sheet, which could potentially damage its viscosity and thermal conductivity.
Heat Sink Installation: After removing the protective film from one side, firmly press the pad onto the heat sink surface. Apply pressure evenly and secure the pad in place using screws for fixation.